BIO 介绍一个升级bios不用接电池得方法...

guryhwa

不用我翻译了吧
  
yes, i have a method which can upgrade the bios without a fully charged battery..
  
first of all ,you need to make a bios-update floppy disk and another clean bootable disk with no config.sys and autoexec.bat
  
then copy the following files from the bios-update disk to the bootable disk: phlash.exe and $0179000.FL1 $0179000.FL3.
  
and rename the $0179000.fl1 to bios.rom ,$0179000.fl3 to platform.bin
  
finally use the bootable disk to reboot. And turn to driver  letter a:>,just type "phlash<enter>",this program will automatically search for the file platform.bin(the manufacturer specific initialization file) and use the default file bios.rom to update bios. everything will be done just as using the bios-update disk. And this method will not detect whether you use a AC adaptor/battery nor not.
  
warning:  
    take the risk with your own...this is NOT a safe way to update the bios which IBM recommended.though it really works
  
                                                                         guryhwa@163.net

[ Last edited by 折腾 on 2004-1-6 at 12:55 ]

HOPE

制作一张BIOS更新的软盘和一张DOS启动盘，DOS启动盘不要有config.sys和autoexec.bat这两个文件。
把BIOS更新盘的phlash.exe , $0179000.FL1 $0179000.FL3拷贝到DOS启动盘上，并且把$0179000.fl1 改名为bios.rom ,$0179000.fl3 改名为platform.bin。
然后用DOS盘启动，输入phlash，程序会自动查找platform.bin并用bios.rom更新机器上面的BIOS，而不会提示电池之类的信息。
注意：此法虽然经过多次试验成功，但风险自负。
  
PS：我刚才查看了T23的BIOS更新盘，并无$0179000.fl3 这个文件，只有$017E000.fl1 。如何？

guryhwa

灵活一点啦,反正就是一个512K的大文件改成bios.rom;一个2k的小文件改成platform.bin

wesley_chuang

下载了1.22版bios后（tp600)，制作成功bios启动盘，没有发现说的2 k的文件，只有$0029000.fl1(512k)、$0029000.fl2（116k)两个文件.另外也没有phlash.exe 文件，只有flash2.exe\updtflsh.exe\updtrom.exe\utilinfo.exe\userint.exe等exe文件，不知那个是刷新程序？